Accessories
Technopipe Accessories
MIDI to 6.5mm mono ADAPTER CABLE for the Technopipes
This handy Cable has been developed by us right here in Brisbane and has been tested and approved by Fagerstrom Sweden, it will connect to the technopipes supplied midi cable and give you approximately 4m of adapter cable that can be plugged into any guitar amp and sound board, and will also fit most home stereo 1/4″ mic sockets.
If you are buying one of these with the pipes then use the Add to cart button on the Technopipes page.
$20 with pipes $25 separately, including post. within Australia.
Edirol UM1
UM-1X is a simple USB MIDI interface offering one MIDI input & one MIDI output in a complete cable to connect your MIDI device directly to a computer.
- 1-In/1-Out USB MIDI Interface, control up to 16ch of MIDI equipment.
- Fast and stable MIDI data transmission realized by fast processing Technology(FPT).
- Complete cable style body from computer end to MIDI ends.
- Signal indicators for 1-In/1-Out.
EMAIL for best price.
For more information Including user manuals and drivers, visit the roland website HERE
A huge range of Roland and Edirol Midi and sound gear is available through us. Please EMAILwith any requests.
………………………………………………………………………………………………………………………………………………………..
KORG CA40 tuner only) Price $48 Including Postage within Australia
With a wide range that covers A0 (27.50 Hz) – C8 (4186.01Hz), you can tune a variety of instruments with the CA-40, including wind, string, and keyboard instruments. The pitch and range are detected quickly and accurately. You can use the built-in high-sensitivity microphone to detect the pitch of an acoustic instrument without requiring any other equipment. Alternatively, you can use the separately sold CM-100 contact microphone to send the vibration of the instrument directly to the tuner, so that you can tune accurately without worrying about other sounds in the environment. An output jack (bypass) has been added, making it easy to check the tuning even while you perform.
The Calibration function lets you adjust the pitch in 1 Hz steps over a range of 410 – 480 Hz in order to accommodate a variety of concert pitches, giving you the flexibility to tune accurately to any song or key. There’s also a memory backup function that preserves the Calibration setting and Sound Out settings even when you turn off the power.
The CA-40’s display has been enlarged for even better visibility. In addition to providing both the accuracy of an LCD and the easy viewing of a needle-style meter, red and green LEDs are also provided to indicate pitch deviations, making tuning smooth and easy. Especially at Night.
THE R.G. Hardie FLEXISTICK
The Flexistik is a precision made blowpipe designed to achieve optimum blowing position and maximum airflow into the pipe bag. It is made of a series of components to adjust the length and angular position of the blowpipe.
It extends from 8 to 12 inches (21-31cm) using a locknut and tube assembly and together with a swivel joint the piper can adjust the blowpipe to a comfortable position while performing.
The mouthpiece design and bore size ensure maximum airflow and comfort.
The Flexistick comes complete with 2 removable/replaceable mouthpieces, Offering both a flat/wide mouthpiece complete with Rubber cushion and A traditional round mouthpiece.
Has a non return valve built in.
I have found these to be great for learner pipers who have not yet developed a feel for the pipes and also often find a standard blow stick too long.
These can be adjusted in angle and length as the piper matures.
The Flexistick sells for $135 including postage.
Cotton Cleaning Brushes3 soft Cotton Cleaning brushes and 1 oil brush, give you the correct sizes for cleaning and oiling stocks, drones, and chanter
$30 including postage within Australia
Moose Valve
The Moose Valve is a new and very innovative Blowpipe Stock Valve it is supplied with a 2 Year Guarantee.
It is very easy to fit and remove using a tool provided and fits securely in position. Can be used in any type of bag set up and is fully adjustabe from 3/4″ – 7/8″. Fits internal tapered bores with no requirement to ream or drill stock.
The Moose Valve features a large bore for efficient air delivery and is 100% Airtight.
Once fitted, the Moose Valves acts as a water trap which effectively collects excess moisture which can be tipped out at any time by simply removing the blowpipe.
(I always take one of these with me as they are the only valve i have found that will instantly and easily fit any GHB stock, and make a great addition to any emergency repair kit) dont go competing without one!
You can learn more on the Moose Valve website
$39 including post within Australia
……………………………………………………………………………………………………………………………………………………….
Moose tubes
Moose Tubes are tubes for connection to suitable moisture control systems, the tubes take seconds to fit and/or replace without any need to remove a stock from the bag!!
They are incredibly easy to fit and replace by simply screwing securely into position in the bottom of each stock. The secure fitting is very similar to that used on the very popular Moose Valve.
Moose Tubes feature a large bore for efficient air delivery and are 100% Airtight when fitted, supplied complete with Moose Connector but Replacement Moose Tubes are also available at a cheaper price without the connector.
For full installation and care instructions have a look at the makers website HERE
Price $60 with connectors, $40 without, includes postage
……………………………………………………………………………………………………………………………………………………..